JIYU JY-968JKGSSQT(PUR) Automatic Four-channel Edge Banding Machine

Trimming the edge of the board after cutting 

Equippedwitha 2.2KW high-power motor,

consistsoftwofrontandrear millingtools,
Maximum pre-millingheight 40mm (optional 60mm),

Glue evenly applied and firmly bonded

The advantage is that according to the different colors of the panels and the different colors of the edge banding, you can choose different colors of glue to solve the glue line problem.

Four different edge banding materials can be prepared 

and used at the same time, and can be automatically and  quickly switched according to production needs without  manual intervention. Improve efficiency and automation, and reduce material waste.

Make the board and edge banding fit together 

The edge banding glued on the board is pressed by six pressing wheels to make the board and edge banding fit more firmly.

Quick and stable trimming of front and rear edge banding

The double column end cutting can effectively reduce 

the problem of plate bumping during the head trimming  process, and the independent column makes the head trimming more stable when rising and falling, making the head trimming more accurate

Trimming th eupper and lower edge banding

Clean up residual glue

Clean off the excess glue squeezed out from the upper and lower seams of the edge banding on the board to prevent it from sticking to the polishing wheel and reduce the frequency of polishing wheel replacement.