No.
|
Structure
|
Specific instructions
|
Function
|
1
|
Machine body structure
|
Worktop: 28mm steel plate is used for the table top, 18mm for the auxiliary table, and the square tube is welded in one piece.
Body: Reinforced square tube welded, annealed at zero temperature. |
Guarantee the long-term sawing accuracy of the machine, and also ensure that the machine body will never deform and be durable. |
2
|
Electrical structure
|
Pneumatic |
More pressure, multiple boards are not easy to slide. |
Motor: The main saw motor is 15kw, the small saw motor is 1.5kw, and the traction motor of the saw car is 2.0KW. |
|
Electrical parts: use Yonghong PLC programming controller and Schneider contactor to prolong the service life of the machine. |
Stable electrical parts prolong the service life of the machine. |
Saw carriage limit device: using servo positioning control |
It replaces the previous rod-type limit switch, avoiding the situation that there is dust and it is easy to get stuck. |
Pressure: The pressure of this equipment is maintained at 0.6-0.8kgf/cm2 during use |
Greater pressure ensures cutting accuracy. |
Running motor INVT |
Run more smoothly ans stable. |
19 inch computer monitor |
|
Voltage: This device operates on 380 volts 3 phase 50 Hz. |
|
3
|
Security structure
|
The feed port uses a manual safety lever emergency stop device. |
Ensure operator safety.x |
4
|
Sub table structure
|
The feed port uses a pneumatic floating bead table and a 3kw high-pressure fan. |
Easy to move the boards. |
5
|
Buffer structure
|
Adjustable cushioning force buffer is used. |
It replaces the spring buffer in the past, avoiding the vibration of the whole machine and the easy deformation of the spring. |
6
|
Transmission structure
|
Guide rail device: Use φ20mm, φ25mm circular guide rails. Saw carriage lift separate double guide rail. |
After high-frequency treatment, the hardness reaches 62º, durable and wear-resistant, not easy to deform. |
Rack and pinion traction drive |
More powerful and stable transmission, higher precision |
The main saw belt uses a timing belt. |
The main saw timing belt is twice as durable as the V-belt. |
7
|
Saw shaft structure
|
ACUCE main saw uses φ400*φ75*4.4mm alloy saw blade.
ACUCE small saw adopts φ200*φ50*4.3/5.3 alloy saw blade. |
|
8
|
Dust-proof structure
|
The dust-proof curtain can make the working environment more tidy and the sawing precision is higher. |
There is only slight dust in the whole panel cutting workshop, which reduces the harm to people, the production environment is cleaner, and the noise is low. |
9
|
Control structure
|
Cabinet can be rotated 180º using full touch screen buttons. |
Suitable for operation at different angles, easy to use. |
10
|
Automatic feeding device
|
The manipulator running device uses precision round rails.
INVT servo motor transmission uses precision gears and racks. |
Reduce mechanical tolerance, sawing precision. |